Features
Return To Top
14mm Glass on Glass Compatible
Prefer to use a Glass Bowl? Well we got you covered! The bowl comes standard with a 14mm glass on glass taper, so it can easily be used on other 14mm glass waterpipes or simply swapped out with a glass on glass bowl.
Bypass Valve
1) Closed: Smoke passes from bowl into base of water pipe
CNC Engraved
All markings on Stem been CNC engraved prior to anodizing, which means that the letters and logos are actually cut into the material, not just printed. Most importantly, this ensures that the markings will literally last a lifetime without fading!
Brush Finished
Prior to anodizing the stem, we give the engraved surface a sleek and uniform brush finish by hand. This gives the stem a very unique, reflective surface which perfectly compliments the overall machined geometry.
6061T6 Aluminum,
TypeIII anodized
Material
Applications
6061-T6 is an aluminum alloy that has been solution-hardened and artificially aged, which is then anodized at near freezing temperatures producing a thick film of anodic-aluminum-oxide (AAO). It is typically used for fabricating:
Aircraft and Aerospace structures (AAO improves longevity)
Firearm sound suppressors
AR-15 upper and lower receivers
UHV (ultra-high-vacuum) chambers
Cookware (AAO produces non-stick, flavor-free surface)
High performance automobile pistons (AAO serves as a heat barrier)
High speed machine parts (AAO increases abrasion resistance)
Naval/Marine (AAO improves corrosion resistance)
Scuba Tanks
.png)
Until now, clearing the chamber of tobacco smoke required the user to either pull the entire stem/bowl out of the water pipe or lift his/her finger off of a hole drilled in the side of the pipe.
With the SUBZERO waterpipe, all the user has to do is simply PUSH! By pressing the Bypass Valve down, air is allowed to enter below the bowl, producing the same exact effect at a fraction of the effort! When sleeve is released, it automatically springs back to the sealed position.
2) Open: Fresh air is injected beneath bowl
Specifications
Return To Top
Diameter
1.290in
Height
5.450in
Materials
6061-T6 Aluminum Alloy
White Acetal Thermoplastic (slide)
316 Stainless Steel spring
Nirtile and Viton Orings
Aluminum Treatment
TypeIII Hardcoat Anodized
Manufacturing
CNC Turned and Milled
Assembly press-fitted
Engraving
CNC Engraved
Tolerance
+/- 0.002 inches
You must be 18 years of age or older to visit this site. By entering and/or accessing this Site, you are representing and warranting that you are 18 years of age or older.
If you are under 18 years of age, click here to exit now.
The term “waterpipe” is in reference to a device constructed for the sole purpose of filtering tobacco smoke/vapor via one or multiple water baths. Usage of this site is subject to our terms and conditions
2018 JET Filtration Systems
©